![]() ![]() This will sometimes require a creative use of shims against the shower base to get this row just right, since most shower bases will not be perfectly flat or straight along this edge. That means that cutting and dry fitting at least the first couple of rows is super important before you start laying your tile. When installing these all important back wall tiles, the bottom rows must be solid and straight, if you want all the rest of your rows to line up. #Tiled shower floor how toThe screws are removed the next day when the adhesive dries.įor a more detailed account of this procedure, refer to my post on Tile Edge Trim – How to Choose It and Install It (Updated). Then simply glue them in place using a tiny amount of polyurethane adhesive every 6″ or so along the trim.įurther secure the trim to the wall with 6-8 wafer head screws to allow the trims to follow the undulations in the wall (as long as they are not too severe). Then, you can mark your new trim position, temporarily attach the trim and dry fit the first row of tiles to see if it all works out.ĭraw a vertical pencil line on both side walls of your shower enclosure where you’ve chosen to mount your trims. If you’re lucky, you can adjust the trim position so no tile cuts are needed. Then lay out a row of shower wall tiles on the floor (with spacers), until you reach slightly beyond this measurement without using any cut tiles. ![]() The best way to determine the placement of your trim is to measure how far out the shower base (or shower pan)comes out from the back wall. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |